Button IDs

 BF_Basse


đã Post24 Tháng 9 2011 - 9:41 pm
Having some trouble with the Button ID's. I made a new building that would replace the House on page 1 civilian. I used the palisade wall as base, but I changed its graphics, HP, name etc. Now the new building won't appear on the builder when I want to build the new building. I made the house have no training location, so the new building should show up, but it doesn't. A little help please? :)
Đường dẫn | Trả lời | Trích dẫn
 Rambit


đã Post24 Tháng 9 2011 - 11:41 pm
Is there no button there at all? If there isn't then you will need to add technology to make the new building buildable OR tick the box saying "available without techage". If the house icon is still there then make sure you change the train location of all the different houses.
Đường dẫn | Trả lời | Trích dẫn
 BF_Basse


đã Post25 Tháng 9 2011 - 12:03 am
Rambit wrote:
Is there no button there at all?
No button at all, it's empty :(
Rambit wrote:
If there isn't then you will need to add technology to make the new building buildable OR tick the box saying "available without techage". If the house icon is still there then make sure you change the train location of all the different houses.
AGE 2 has no tech editor, and AGE 1.7 and 1.8 either crashes or says "Version Not Installed" when I try to open the .dat. AGE 1.6 works ok, but crashes once in a while and I can't launch the game from it. Anyway, I ticked the available without techage and removed ALL houses from the builder. Still no icon. I even tried making Dark Age being the tech required for the building :(
Đường dẫn | Trả lời | Trích dẫn
 Rambit


Đã được sửa25 Tháng 9 2011 - 1:13 am bởiRambit
You shouldn't need to launch game from it, just launch how you normally would. As long as it is saved it will still have the same effect. I use 1.6, I have had a few frustrating crashes today but usually don't crash often. Perhaps it is worth using 1.6 to add techage for this one thing.

But it is odd that you can't get it to appear after ticking that box. Maybe check that the icon ID is a buildings one. Other than that... make sure you have the right builder id?

EDIT:
Make sure you have the class of a civilian building, or it will appear on the military units page.
Đường dẫn | Trả lời | Trích dẫn
 BF_Basse


đã Post25 Tháng 9 2011 - 11:08 am
Well, the icon doesn't appear on military buildings either :(

Train Location is 118 - Builder, just like all the other buildings. I disabled ALL other buildings from the builder (giving them build location -1) but still, only the TC appears :(
Đường dẫn | Trả lời | Trích dẫn
 Rambit


đã Post25 Tháng 9 2011 - 9:50 pm
Okay well it seems like you have two options:

1 - use 1.6 to make a techage and hope it doesn't crash

2 - copy/paste your new building over one which is already buildable as it would already have techage making that unit ID buildable.
Đường dẫn | Trả lời | Trích dẫn
 BF_Basse


Đã được sửa26 Tháng 9 2011 - 5:22 pm bởiBF_Basse
Okay, I'll try that

EDIT: Didn't work to replace the Palisade Wall or House. I even had All Techs on, but it still didn't appear :(
Đường dẫn | Trả lời | Trích dẫn
 Rambit


đã Post26 Tháng 9 2011 - 10:03 pm
lol you don't like to make it easy. Okay well just start fresh and edit a standard building rather than making a new one. Maybe its because it is a wall it is messing something up, its hard to know.
Đường dẫn | Trả lời | Trích dẫn
 BF_Basse


đã Post27 Tháng 9 2011 - 5:27 pm
Okay, I'll try to edit an existing building instead :)


Đường dẫn | Trả lời | Trích dẫn
[1]
Hiển thị 1 - 9 ngoài 9 Bài viết
Nhảy Forum
2 User(s) làđọc chủ đề này 30 phút vừa qua
0Thành viên2 Khách

What's popular right now: